You’re planning a big road trip on your motorcycle. You’ve got your bike all packed and ready to go, but you’re not sure how to install your soft panniers. Don’t worry, we’ve got you covered. In this article, we’ll show you how to install soft panniers so you can hit the open road with confidence.
So, how do you install soft panniers?
To install soft panniers, you need to first find the right pannier racks for your bike. Once you have the racks, you need to mount them on the bike. After that, you can install the panniers by putting them on the racks and lashing them down.
Let’s dig into it and see if we can figure it out.
Step By Step Process On: How Do You Install Soft Panniers?
Here I will explain you step by step process of how do you install soft panniers? let’s see how do you install soft panniers.
REQUIRED TOOLS:
- Measuring tape
- Pencil or pen
- Scissors
- Pannier rack
- Pannier bag
- Bike
- Straps
- Cam buckles
Step-01:
First, you will need to locate the straps on the back of the pannier bag. There are typically two straps located on the back of the bag.
Step-02:
Next, you will need to find the loops on the pannier rack. There are typically four loops located on the rack.
Step-03:
Now, you will need to take the strap from the back of the pannier bag and thread it through the loop on the rack. You will want to do this for both straps on the back of the bag.
Step-04:
After you have threaded both straps through the loops on the rack, you will need to find the cam buckles on the straps. The cam buckles are typically located near the base of the bag.
Step-05:
Now, you will need to take the cam buckle and thread it through the loop on the rack. You will want to do this for both cam buckles on the back of the bag.
Step-06:
Once you have threaded both cam buckles through the loops on the rack, you can now begin to tighten the straps. You will want to make sure that the straps are tight enough so that the bag does not move around while you are riding.
Step-07:
Now that the straps are tightened, you can now begin to load your gear into the pannier bag. Once you have loaded your gear, you can now begin to cinch down the straps so that the bag is snug against the rack.
Step-08:
Once you have cinched down the straps, you will want to check the bag to make sure that it is secure. You can do this by gently tugging on the bag and making sure that it does not move around.
That’s it! You have now successfully installed your soft pannier bags.
If you wanted to watch a youtube video that shows you how do you install soft panniers? I have included a video below:
How Do You Install Soft Saddlebags?
If you’re looking to add some extra storage to your motorcycle, you might be considering soft saddlebags. These bags are a great option if you’re looking for something that’s easy to install and remove, and they can be a great way to add some extra space to your bike without breaking the bank. Here’s a quick guide on how to install soft saddlebags on your motorcycle.
First, you’ll need to find a spot for the bags on your bike. Most people like to install them under the seat, but you can also put them on the back of the bike or on the sides. Once you’ve decided where you want to put the bags, it’s time to start attaching them. Most soft saddlebags come with straps that you can use to secure them to your bike.
If you’re putting the bags on the back of the bike, you’ll need to find a place to attach the straps. Many bikes have loops or D-rings that you can use, but you can also use zip ties or other methods of attachment. Once you’ve found a good spot to attach the straps, you can start putting the bags on the bike.
If you’re putting the saddlebags on the sides of the bike, you’ll need to find a place to attach the straps. Many bikes have loops or D-rings that you can use, but you can also use zip ties or other methods of attachment. Once you’ve found a good spot to attach the straps, you can start putting the bags on the bike.
Once the saddlebags are in place, you can start filling them up with your gear. Be sure to pack them securely so that everything stays in place while you’re riding. When you’re finished packing, you can close up the bags and hit the road.
How Do Pannier Bags Attach To Motorcycle?
Pannier bags are a great way to increase the storage capacity of your motorcycle, and they attach to the bike in a variety of ways. The most common method is to use Velcro straps that go over and under the seat. Some panniers also have additional straps that go around the frame of the bike or through the footpegs.
If you’re using Velcro straps, it’s important to make sure that they are fastened tightly so that the bag doesn’t come loose while you’re riding. You should also check that the bag is securely attached before you start riding, as it can be dangerous if it comes loose while you’re on the road.
If you’re using additional straps, such as those that go around the frame or through the footpegs, it’s important to follow the manufacturer’s instructions carefully so that you don’t damage the bike. These straps are usually strong and won’t break easily, but it’s still possible to damage the bike if they’re not used correctly.
When you’re not using the pannier bags, it’s important to remove them from the bike so that they don’t get in the way. Some panniers can be stored on the bike, but it’s usually best to take them off so that they’re not in the way when you’re riding.
Besides this, In order to attach your panniers to your motorcycle, first remove the rear seat. Sit each pannier over the side of the motorcycle and fasten using the middle Velcro strap from each pannier. Make sure the straps are fastened tightly, then re-attach the seat. Feed the male Velcro straps from the relevant pannier, over, under and up through each seat cover aperture.
How Do You Install A Tusk Pannier Bag?
Installing a Tusk Pannier Bag is easy! Just follow these simple steps:
1. First, find a suitable location on your bike to install the bag. The best location is usually on the back of the bike, near the seat.
2. Next, use the included straps to secure the bag to your bike. Make sure the straps are tight, so the bag doesn’t move around while you’re riding.
3. Finally, fill the bag with whatever you need to carry with you on your ride!
That’s all there is to it! With a Tusk Pannier Bag installed on your bike, you’ll be able to carry all your essential items with you on your rides.
Can You Lock Soft Panniers?
If you’re using soft luggage, there are many innovative ways to lock it. Steelcore locking straps are great, and the lock is very large and visible. This is a great option if you’re looking for security and peace of mind. Another option is to use a U-lock or chain to secure your bag to your bike. This is a great way to deter thieves, as it’s much harder to cut through a U-lock or chain than it is to cut through a strap. Whichever method you choose, make sure you lock your bag to something that is secure and not easy to cut through.
As well as that, There are many ways to lock soft luggage. Steelcore locking straps are great. The lock is very large and visible.
Final Word
How do you install soft panniers?
Installing soft panniers is relatively easy and only requires a few basic tools. First, remove the seat and any other fairings that might be in the way. Next, locate the mounting points on the motorcycle frame and attach the pannier brackets. Once the brackets are in place, simply clip the panniers onto the brackets and you’re done!
With soft panniers, you can easily add extra storage to your motorcycle without compromising on style or performance. So, if you’re looking for a convenient and stylish way to carry your gear, look no further than soft panniers!
Related Post: