How Do You Put Saddlebags On A Motorcycle?

You paid a lot of money for your motorcycle and the last thing you want to do is damage it while installing saddlebags. This installation tutorial will show you the best way to put saddlebags on a motorcycle without causing any damage. You’ll also learn how to properly secure the saddlebags so they don’t come loose while you’re riding.

So, how do you put saddlebags on a motorcycle?

There are a few ways to install motorcycle saddlebags, but the most common method is to use quick-release buckles. First, you’ll need to find the correct position for the saddlebags on the motorcycle. Once you’ve done that, you can attach the quick-release buckles to the loops on the saddlebags. Finally, you’ll need to secure the buckles by wrapping the straps around the motorcycle frame or attaching them to D-rings.

Let’s dig into it and see what we can learn.

Step By Step Process On: How Do You Put Saddlebags On A Motorcycle?

Here I will explain you step by step process of how do you put saddlebags on a motorcycle? let’s see how do you put saddlebags on a motorcycle.


  1. Measuring tape 2. Soft measuring tape 3. Screwdriver 4. Knife 5. Wrench 6. Drill 7. Ratchet set 8. Socket set 9. Allen wrench set 10. Torque wrench 11. Crescent wrench 12. Vise grips 13. Pliers 14. Slip joint pliers 15. Channel locks 16. Safety glasses 17. Ear protection 18. Impact gun 19. Air compressor 20. Air hose 21. Automotive jack 22. Jack stands.


First, you need to measure from the back of the seat to the turn signal. This will give you an idea of how big or small the saddlebag you can get.


If you find that your turn signal is mounted on your fender rail, you can relocate it to the rear fender. There are kits available that will allow you to do this.


Another important measurement to be aware of is the bottom of the saddlebag to the exhaust. You want to have at least one to two inches between the two. This can often be addressed when it comes time to mounting the bags.


We’re going to be installing these tourmaster saddlebags. They have a velcro yoke which makes it easy to adjust to different fender widths. You can also use the adjustment to get the clearance you need on your exhaust pipes.


Another nice feature about these saddlebags is that they have a neoprene pad to protect your paint, and a hard back so the saddlebags will keep their shape.


Installing throw over saddlebags or even some soft bags, you might find that you need saddlebag supports to help keep the bags from falling into the wheel.


The yoke is going to rest under the passenger seat, so we need to remove that. For your bike, you may have to refer to your own owners manual as to how to do so.


With the saddlebags over the fender, we can start checking our clearance against the exhaust pipe. As we can see, we’ve got plenty of gap here between the exhaust and the bottom of the saddlebag.


But keep in mind, once you start loading the saddlebags up, they’re going to start sagging down, even getting closer to that exhaust. So if you need to adjust them higher, you can do so by pulling the velcro back and bringing the saddlebag up on the yoke a little bit higher.


These saddlebags have four attachment points, two on each side, one at the front and one at the rear of each saddlebag. They also come with these four loops which can thread around a secure point on the bike.

If you wanted to watch a youtube video that shows you how do you put saddlebags on a motorcycle? I have included a video below:

Can You Add Saddlebags To A Motorcycle?

Saddlebags are often thought of as an essential piece of gear for motorcyclists, particularly those who enjoy touring on their bikes. After all, saddlebags provide a convenient place to store all of your essentials while you’re on the road. But what if your motorcycle doesn’t have saddlebags? Can you add them?

The answer is yes, you can add saddlebags to most motorcycles. There are a few different ways to do this, depending on the style of bike you have. If you have a cruiser, for example, you can usually find saddlebag brackets that bolt onto the frame. This gives you a place to attach the bags so they don’t flop around.

If your bike doesn’t have a frame that’s conducive to attaching saddlebags, you can also get saddlebag supports that strap onto the bike. These supports typically attach to the bike’s passenger peg mounts. Again, this helps to keep the bags from flopping around while you’re riding.

Of course, before you add saddlebags to your motorcycle, you’ll want to make sure they fit properly. This means finding bags that are the right size and shape for your bike. It’s also important to make sure the bags don’t interfere with any moving parts on the bike, such as the chain.

Once you’ve found the perfect saddlebags for your motorcycle, adding them is a relatively simple process. If you’re using saddlebag brackets, you’ll need to bolt them onto the frame. If you’re using saddlebag supports, you’ll need to strap them onto the bike. In both cases, you’ll want to make sure the bags are securely attached so they don’t come loose while you’re riding.

So, can you add saddlebags to a motorcycle? Yes, you can. Just be sure to choose the right bags for your bike and attach them securely.

Furthermore, To set your saddlebag higher or lower, you simply get the straps through the desired set of slots. Then, to anchor the bag, you simply loop the straps around a frame. It could be elements from your motorcycle, or saddlebags holders, such as rails.

How Do You Mount A Hard Saddlebag To A Motorcycle?

If you’re planning on doing some serious touring on your motorcycle, then you’re going to need to invest in some hard saddlebags. But before you can start packing up your bags and hitting the open road, you need to know how to properly mount them to your bike. Here’s a quick guide on how to do just that.

First, you’ll need to remove the seat from your motorcycle. This will give you easy access to the fender bolts that you’ll need to remove in order to mount the saddlebags. Once the seat is off, locate the fender bolts and remove them with a wrench.

Next, take the saddlebags and position them on either side of the motorcycle, making sure that the bottom of the bags is flush with the fender. Once you have the bags in place, start threading the fender bolts back into place, but don’t tighten them all the way just yet.

Now, take the straps that came with the saddlebags and loop them around the frame of the bike, underneath the seat. The straps should be positioned so that the buckles are facing outwards, making it easier to access them when you’re ready to strap the bags down.

Once the straps are in place, you can go ahead and tighten down the fender bolts. Make sure that the bolts are tight enough so that the saddlebags are secure, but not so tight that they’re difficult to remove.

And that’s it! Now you know how to properly mount hard saddlebags to a motorcycle. Just strap them down before you hit the road and you’ll be good to go.

How Do You Install Throw Over Bags?

Assuming you mean how to install motorcycle saddlebags:

Most motorcycles come with saddlebag supports, if your motorcycle didn’t come with these you can purchase them from your local motorcycle dealer or aftermarket parts retailer. If your motorcycle has saddlebag supports, great! You’re one step closer to being able to install your new saddlebags.

If you have saddlebag supports, installation is a breeze. Simply line up the support brackets on the saddlebags with the support bracket mounts on the motorcycle. Once you have the saddlebags lined up with the support bracket mounts, bolt the saddlebags to the motorcycle using the provided hardware.

And that’s it! Your saddlebags are now installed.

How Do Saddlebags Attach To Saddle?

Most saddlebags come with sewn-in clips, snaps, or clasps that attach to the D-rings and saddle strings. Different types of saddlebags require different mounting strategies. Some types go on the front, side, or back of the saddle.

The most important thing to consider when mounting a saddlebag is its weight. You don’t want to add too much weight to one side of the saddle, as this can throw off your balance and make riding difficult. It’s also important to make sure the bag is securely attached so it doesn’t bounce around or fall off while you’re riding.

If you’re not sure how to attach your saddlebag, consult the instructions that came with it or ask a knowledgeable friend or saddle fitter for help.

Besides this, A saddlebag is a type of bag that is attached to a saddle. There are different types of saddlebags, and they are attached to the saddle in different ways. Some saddlebags go on the front, side, or back of the saddle.

Final Word

Adding saddlebags to your motorcycle is a great way to increase storage capacity and add a bit of style to your bike. But before you can enjoy the extra space, you’ll need to put them on. This tutorial will walk you through the process of installing motorcycle saddlebags step by step.

1. First, you’ll need to remove the seat from your motorcycle. This will give you easy access to the fender bolts that you’ll need to loosen in order to install the saddlebags.

2. Once the seat is off, locate the fender bolts and loosen them with a wrench. Be careful not to remove the bolts completely, as you’ll need to put them back in place once the saddlebags are installed.

3. Next, position the saddlebags so that the straps are facing the back of the motorcycle. Make sure that the bags are sitting level and that the straps are not twisted.

4. Now, you can begin to bolt the saddlebags in place. Start by threading the bolts through the loops on the back of the saddlebags and into the fender. Tighten the bolts until the saddlebags are secure.

5. Finally, replace the seat and you’re ready to hit the road with your new motorcycle saddlebags!

Related Post:

Leave a Comment